Sie suchten nach: Trajan Scientific and Medical

Lieferant: Trajan Scientific and Medical

Beschreibung: Vespel/graphite GC ferrules are made from quality polyimide/graphite blend. They seal with minimal torque and can be reused and repositioned along capillary columns if not over compressed in the fitting. Due to slight shrinking at high temperatures, they must be retightened after initial temperature cycles to avoid leaks.

Lieferant: Trajan Scientific and Medical

Beschreibung: A high-capacity gas purifying system that can remove a combination of oxygen, moisture and hydrocarbons, (greater than C4) from inert gases and hydrogen.

Lieferant: Trajan Scientific and Medical

Beschreibung: The SPure H₂O/HC Filter removes moisture, oil, dust, and hydrocarbons (C5 and heavier) from dry air and inert gases.

Lieferant: Trajan Scientific and Medical

Beschreibung: ZPure™ O₂/H₂O gas filters removes oxygen and water from inert gases, He, Ar, N₂ and H₂, making it ideal for use with GC and GC/MS carrier gas lines. It differs from the Zpure dual filter in that it is completely non-hazardous and is recommended for any application requiring ultra-pure gas, free from oxygen and water.

Lieferant: Trajan Scientific and Medical

Beschreibung: The ZPure™ H₂O 'High Sensitivity Moisture Indicating' Filter is used for applications requiring high efficiency moisture removal. The high sensitivity indicator signals breakthrough at 1 ppm water and changes from blue to brown.

Lieferant: Trajan Scientific and Medical

Beschreibung: The SGE inlet liner range aims to make it simple for all gas chromatographers to select the correct liner. Choosing the right inlet liner and injection parameters can increase peak areas and reduce detection limits by up to 300%.

Lieferant: Trajan Scientific and Medical

Beschreibung: The SGE inlet liner range aims to make it simple for all gas chromatographers to select the correct liner. Choosing the right inlet liner and injection parameters can increase peak areas and reduce detection limits by up to 300%.

Lieferant: Trajan Scientific and Medical

Beschreibung: These reusable ferrules are made from 100% graphite. They have a temperature limit of 450 °C.

Lieferant: Trajan Scientific and Medical

Beschreibung: Konzipiert für die Installation nur mit der Kraft Ihrer Finger für eine einfache, auslaufsichere Installation von Kapillarsäulen ohne Verwendung von Werkzeugen. Die Entwicklung basiert auf den einzigartigen, leck- und luftfreien Eigenschaften der SilTite™ Klemmhülsen, was zu einer überdurchschnittlichen Luftdichtigkeit führt, um das Hintergrundrauschen bei empfindlichen MS-Anwendungen zu reduzieren.

Lieferant: Trajan Scientific and Medical

Beschreibung: Capillary LC, ProteCol™ unions offer complete versatility for connecting a range of capillary tubing.

Lieferant: Trajan Scientific and Medical

Beschreibung: These are plunger-in-barrel syringes. Each plunger is individually fitted for each microsyringe for perfect sealing.

Lieferant: Trajan Scientific and Medical

Beschreibung: Needle, Replacement needle, Gauge: 23, Länge: 70 mm, Ø ext.: 0,63 mm, Sleeved side hole

Artikel-Nr: (548-1655)

Lieferant: Trajan Scientific and Medical

Beschreibung: Spritzen, Chromatographie, HPLC, Gasdicht, Ende mit M10-1,0-Schraubgewinde, 500C-HITACHI, Volumen: 500 µl, Für: L7200/7250, AS1000/2000/4000 LC, VE: 1

UOM: 1 * 1 ST

Aktion

Lieferant: Trajan Scientific and Medical

Beschreibung: On-column syringes are suitable for general purpose applications.

Lieferant: Trajan Scientific and Medical

Beschreibung: Ersatz-Luer-Lock-Anschluss, abnehmbar (enthält 1 Luer-Konus aus Kel-F und 1 Metalladapter mit Gewinde)

Lieferant: Trajan Scientific and Medical

Beschreibung: Needle, syringe, Diamond MS, Ultraglatt, hydrophil behandelt, Gauge: 23, Länge: 57 mm, Ø ext.: 0,63 mm, Ø int.: 0,24 mm, Spitzentyp: Konus, Blau