Sie suchten nach: solentim


458  results were found

Sort Results

Listenansicht Hybridansicht (NEU)
SearchResultCount:"458"
Beschreibung: Leak detector with sensor for 3/4" thread connector, 6,8 m³/h, controlling device and solenoid valve: 80L×105W×41H mm with sensor cable length: 2 m, R ¾" i/i
Artikel-Nr: SGWAW2T808004
UOM: 1 * 1 ST
Lieferant: EVOQUA WATER TECHNOLOGIES


Beschreibung: Drum pump accessory, Service Kit for Solenoid Metering Pump, 21- 44 GPD
Artikel-Nr: MFLX78118-82
UOM: 1 * 1 ST
Lieferant: Avantor Fluid Handling


Beschreibung: Soxhlet-Extraktionsapparate, WD 30 Monitoring unit with two flow sensors and solenoid valve, as well as cables to connect it to the controller (1.5 m)
Artikel-Nr: BEHRB00645358
UOM: 1 * 1 ST
Lieferant: BEHR


Beschreibung: Leak detector, with flow rate 1,2 m³/h, controlling device: 126L×79W×54H mm, solenoid valve: 82L×52W×41H mm and sensor cable length: 2 m, R ¾" i/a
Artikel-Nr: SGWAW2T828181
UOM: 1 * 1 ST
Lieferant: EVOQUA WATER TECHNOLOGIES


Beschreibung: Diaphragm valve, Galtek®, Three-way, inlet port 1/4" orifice, outlet port 1/4" FNPT, voltage: 24 VDC, electrical housing: grommet
Artikel-Nr: ENTE203-3414-215
UOM: 1 * 1 ST
Lieferant: ENTEGRIS


Beschreibung: Diaphragm valve, Galtek®, Two-way, inlet port 1/4" orifice, outlet port 1/4" FNPT, voltage: 24 VDC, electrical housing: grommet
Artikel-Nr: ENTE203-1414-215
UOM: 1 * 1 ST
Lieferant: ENTEGRIS


Beschreibung: Multi-Media Valve 3-Way, 1/8" A-Lok, 24 VDC, 100 psi max
Artikel-Nr: MFLX01870-07
UOM: 1 * 1 ST
Lieferant: Avantor Fluid Handling


Beschreibung: Multi-Media Valve 2-Way NC, 1/8" A-Lok, 24 VDC, 250 psi max
Artikel-Nr: MFLX01870-06
UOM: 1 * 1 ST
Lieferant: Avantor Fluid Handling


Beschreibung: Multi-Media Valve 2-Way NC, 1/8" NPT(F), 24 VDC, 100 psi max
Artikel-Nr: MFLX01870-09
UOM: 1 * 1 ST
Lieferant: Avantor Fluid Handling


Beschreibung: Multi-Media Valve 2-Way NC, 1/16" A-Lok, 24 VDC, 1250 psi max
Artikel-Nr: MFLX01870-01
UOM: 1 * 1 ST
Lieferant: Avantor Fluid Handling


Beschreibung: Fill port, INV-907
Artikel-Nr: 18-1127-66
UOM: 1 * 1 ST
Lieferant: Cytiva


Beschreibung: Injection needle OD 0,7 mm
Artikel-Nr: 18-1801-42
UOM: 1 * 12 ST
Lieferant: Cytiva


Beschreibung: Manual valve, LV-3, includes 4 m PET tubing, stopper and O-rings
Artikel-Nr: 19-0016-01
UOM: 1 * 1 ST
Lieferant: Cytiva


Beschreibung: Manual valve, LV-4, includes 4 m PET tubing, stopper and O-rings
Artikel-Nr: 19-0017-01
UOM: 1 * 1 ST
Lieferant: Cytiva


Beschreibung: Motor valve, PV-908, 25 MPa, UniNet cable included
Artikel-Nr: 18-1108-41
UOM: 1 * 1 ST
Lieferant: Cytiva


Beschreibung: Injection kit INV-907, includes fill port, needle and syringe holder
Artikel-Nr: 18-1110-89
UOM: 1 * 1 KIT
Lieferant: Cytiva


81 - 96 of 458