Sie suchten nach: Ionenaustauscher

Artikel-Nr: (BIND8012-0759)

Lieferant: Binder

Beschreibung: Dieses System dient zur Vollentsalzung von Leitungswasser für Befeuchtungssysteme von BINDER Klimaschränken. Das Ionenaustauscher-System besteht aus einem Druckbehälter, einer Einweg-Filterkartusche und einem Druckbehälterdeckel.

UOM: 1 * 1 ST

Aktion

Artikel-Nr: (141-0552)

Lieferant: MIELE

Beschreibung: The Aqua-Soft system provides a continual supply of soft water and is suitable for water with a hardness up to 71° dH. It operates as a level controlled two-tank system, consisting of two cartridges with ion exchange resins and a salt reservoir. The resins are enriched with sodium ions. The hard water flows over the resins in the first cartridge, where calcium and magnesium ions are exchanged for sodium ions. At this time, no water is flowing through the second cartridge. When one cartridge is exhausted, the water is routed to the second cartridge by means of a hardness level selector corresponding to the hardness of the local water, which is inserted by customer service when the device is used for the first time. At the same time, the regeneration of the resins from the exhausted container is activated. For this treatment, brine (NaCl) is drawn from the salt reservoir. The reservoir must be replenished regularly with coarse salt pellets. Fill quantity approx. 25 kg.

UOM: 1 * 1 ST

Aktion

Lieferant: MIELE

Beschreibung: Aqua purifier for two full or partial demineralisation cartridges. The casing made from white steel or stainless steel.

Artikel-Nr: (SMEGWP3010)

Lieferant: SMEG

Beschreibung: Der Wasseraufbereiter WP3000 kann mit den Modellen GW3060 und GW4090 zur Herstellung von deionisiertem Wasser bei 0,8 - 1 µS/cm verwendet werden, welches sich für den letzten Spülgang bei Reinigungsautomaten für Instrumente eignet. Das System verwendet Mischbettharze (Einweg), die auch Siliziumdioxid zurückhalten können. Wenn die Harze verbraucht sind, können sie einfach mit dem MI700WP-Kit ausgetauscht werden.

UOM: 1 * 1 ST

Aktion

Artikel-Nr: (HECH40075010)

Lieferant: GLASWARENFABRIK KARL HECHT

Beschreibung: Ion exchanger for purified water.

UOM: 1 * 1 ST

Aktion

Artikel-Nr: (REST22000)

Lieferant: Restek

Beschreibung: This Parker HydroGen mate deionising water system is an economical means of providing deionized water to hydrogen generators or for other uses. It removes organics, phosphates, chlorine and essentially all ionizable constituents from water supply.

UOM: 1 * 1 ST

Aktion

Lieferant: ENVIROFALK PHARMAWATERSYSTEMS

Beschreibung: Pressure-resistant water deionisation cartridges made from stainless steel, filled with regenerable mixed-bed resins.

Artikel-Nr: (172-6111)

Lieferant: EVOQUA WATER TECHNOLOGIES

Beschreibung: Continuous electrodeionisation is a safe, chemical-free way to take RO (reverse osmosis) water to a higher level of purity. This water deionisation unit is capable of withstanding variable pressure and can be used for many different tasks. The standard CDI-LX systems combining single modules on a frame with power supplies, controllers, piping, sample valves, cleaning connections and flow and quality monitoring instrumentation.

UOM: 1 * 1 ST

Aktion

Lieferant: ENVIROFALK PHARMAWATERSYSTEMS

Beschreibung: Pressureless water deionisation cartridge with plastic housing, filled with regenerable mixed-bed resins.

Artikel-Nr: (WERN199234)

Lieferant: ENVIROFALK PHARMAWATERSYSTEMS

Beschreibung: Ready-to-connect systems for the production of soft water.

UOM: 1 * 1 ST

New Product Aktion

Artikel-Nr: (LBCP9000732)

Lieferant: LABCONCO

Beschreibung: WaterPro PS Polishing Stations deliver Type I, 18.2 megohm-cm water from the dispensing valve or optional dispensing gun (refer to descriptions for models that include gun) at a typical rate of 1.8 liters per minute depending on feedwater flow rate and pressure, and installed purification modules.

UOM: 1 * 1 ST

Aktion

Artikel-Nr: (BEHRB00223482)

Lieferant: BEHR

Beschreibung: The standard canister is made of V4A stainless steel with widespread pure water supply applications. They are aslo suitable for second stage purification steps following reverse osmosis. The unique behropur® slit-jet system distributes the input water uniformly over the entire resin bed, thus maximizing exchange capacity and water quality.

UOM: 1 * 1 ST

Aktion

Artikel-Nr: (BARND0805)

Lieferant: Thermo Fisher Scientific

Beschreibung: It is a simple, cost effective method for deionisation or pretreatment of lab water. Typically these units are ideal where water usage is up to 38 litres per day.

UOM: 1 * 1 ST

Aktion

Lieferant: BEHR

Beschreibung: These deionisers are thick-walled, robust and practical mixed-bed ion exchangers made of blue polyethylene with free output to the storage tank. Ideal also for subsequent demineralisation of reverse osmosis system or for an ambitious aquarist.

Artikel-Nr: (171-0484)

Lieferant: ELGA LabWater

Beschreibung: This wall mounted disposable deioniser produces water up to a quality of 10M.-cm at flows of up to 90 l/hr. Designed for users with a requirement for low volumes deionised water, the Micromeg requires no electrical input as its water quality meter is battery operated.

UOM: 1 * 1 ST

Aktion

Lieferant: BEHR

Beschreibung: Mixed bed ion exchanger for small to medium quantities of ultrapure water to the supply from laboratory dishwashers to general care in the laboratory and for smaller consumers in the industry.