Sie suchten nach: Armaturen und Spülbecken

Artikel-Nr: (331582B)

Lieferant: VWR Chemicals

Beschreibung: PP, weiß, ³/₄" Schraubgewinde.

UOM: 1 * 1 ST

Aktion

Artikel-Nr: (332862K)

Lieferant: VWR Chemicals

Beschreibung: PE, weiß, ³/₄" Schraubgewinde.

UOM: 1 * 1 ST

Aktion

Lieferant: KOETTERMANN

Beschreibung: These bench mounted gas taps are sealed by EPDM (ethylene propylene diene terpolymer) which is an extremely durable synthetic rubber roofing membrane.

Artikel-Nr: (BOHLR1250-20)

Lieferant: Bohlender

Beschreibung: Aus ableitfähigem PE-EX, Boden mit integriertem Gefälle für restlose Entleerung.

UOM: 1 * 1 ST

Aktion

Artikel-Nr: (29048.098)

Lieferant: VWR Chemicals

Beschreibung: PE, belüftet, für Kunststoffkanister mit Außengewinde (DIN 42).

UOM: 1 * 1 ST

Aktion

Lieferant: asecos

Beschreibung: These drum taps are made of stainless steel.

Lieferant: LENZ LABORGLAS GMBH & CO.KG

Beschreibung: These drain taps are made of borosilicate glass and are used for aspirator bottles.

Lieferant: KOETTERMANN

Beschreibung: Swivel water taps are sealed by EPDM (ethylene propylene diene terpolymer) or ceramic.

Artikel-Nr: (BOHLR1250-40)

Lieferant: Bohlender

Beschreibung: Aus ableitfähigem PE-EX mit schrägem Boden zur kompletten Enleerung.

UOM: 1 * 1 ST

Aktion

Lieferant: S.C.A.T.

Beschreibung: For integration in fume cupboards or on worktops for easy disposal of liquid solvent waste in large quantities.

Artikel-Nr: (MSGA2796)

Lieferant: asecos

Beschreibung: Feindosierhahn aus Zinkspritzguss.

UOM: 1 * 1 ST

Aktion

Lieferant: JUSTRITE MANUFACTURING

Beschreibung: These faucets can be simply placed on your drum for leakproof dispensing of flammable liquids. The brass construction with a polytetrafluoroethylene (PTFE) seal ensures excellent chemical resistance.

Artikel-Nr: (BROE25350101035)

Lieferant: BROEN-LAB

Beschreibung: One short handle two hole mixer with swivel spout, 200 mm, BROEN®

UOM: 1 * 1 ST

Aktion

Lieferant: BROEN-LAB

Beschreibung: UniFlex™ BASIC fittings for special water are designed to secure maximum purity of the water in laboratory. The operation and configuration of the fittings are highly adapted to the requirements of a modern laboratory. These fittings are surface treated with polycoat powder coating, which is highly resistant to most chemicals, UV light and heat. Body made from LLDPE, POM, PP, PVDF / EPDM rubber.

Lieferant: TEKNOMEK

Beschreibung: Stainless steel sink with double cupboard and drawer is manufactured from high quality, 304 grade stainless steel and is supplied with an inset sink and an in-built storage cupboard for ultimate versatility.

Lieferant: TEKNOMEK

Beschreibung: Our wall mounted scrub sink is a perfect solution for veterinary practices with a variety of different operations- lever, knee paddle or infra-red sensor